LTX9600TS specifications and compatibility

[hvactechfw]

LTX9600TS




Manual
luxproducts.com/support/TX9600TS_ENG_WebManual.pdf



Need help wiring or setting up the LUX LTX9600TS? Reply to this thread.

Single-Stage Heating and Cooling Yes
Compatible with Steam or Gravity Yes
Use with Floor/Wall Furnace 24V or 750mV Yes
Use with Volt Gas Fireplace 24V or 750mV Yes
Use with Pellet Stove for mV Thermostats Yes
Use with Electric Baseboard 120V-240V No
Program Type 7-Day
Program Periods per Day 4.0
Auto System Change from Heat to Cool No
Touch Screen Programming Yes
Backlit Display Yes
Multi-Stage Heating and Cooling Yes
Temperature Displayed Current room temperature
High/Low Desired Temperature Limits Yes
Temporary Vacation Override Yes
Hold Temperature Button Yes
Early-Start Comfort Function Yes
Filter Monitor Yes
Daylight Savings Time Ready No
Optional Battery-Free Operation Yes
Shape Rectangle
Heating Only Yes
Height (Inches) 3.25
Width (Inches) 5.5
Depth (Inches) 1.0
UL Safety Listing No
CSA Safety Listing No
Cooling Only Yes
Compatible with Warm Air Furnace Yes
Compatible with Central Air Conditioning Yes
Compatible with Heat Pump (No Aux./EM) Yes
Compatible with Heat Pump (With Aux./EM) Yes
Compatible with Hot Water Yes

[George Jones]

I am trying to setup this Lux thermostat moving from the Totaline P330-0220.


Currently have setup using the totaline thermostat with these settings:

Red Wire - R
Yellow Wire - Y
Blue Wire - C
Orange Wire - O/B
Green Wire - G
Black Wire - Aux

I have tried these settings with Lux with no luck

Red Wire - RH (with jumper installed)
Yellow Wire - Y (with jumper installed to W1)
Blue Wire - C
Orange Wire - O
Green Wire - G
Black Wire - W2

Dip Switch #1 to On position
Gas/Electric to Electric setting

[hvactechfw]

That looks correct. Does the system operate at all? Exactly what kind of problems is it giving you?