Page 2 of 2 FirstFirst 12
Results 7 to 8 of 8

Thread: How to wire an RTH9585WF1004 to an Aspen HVAC Heat Pump system

  1. #7
    Senior Member

    User Info Menu

    Best not to post your email as you will quickly get on spam lists. Go to advanced then you can upload pics via the manage attachments button at the bottom.

  2. #8
    Junior Member

    User Info Menu

    HVAC Wiring
    There are two wire cables.
    One has 4-wires going to the thermostat
    The other has 2-wires
    Click image for larger version. 

Name:	HVAC wires labeled.jpg 
Views:	1 
Size:	73.8 KB 
ID:	1818Click image for larger version. 

Name:	HVAC wires labeled.jpg 
Views:	1 
Size:	73.8 KB 
ID:	1818
    Looking at the 4-wire cable the white wire has a thick white and black wire. When I replace the 4-wire cable and 2-wire cable do I leave the thick white and black wires connected to the white wire going to thermostat?



    I am going to use a 6-wire cable to replace the two different wires: I assume the light-brown wire in the 6-wire cable connects to the brown wire currently connected to the white wire of the 2-wire cable.

    Can someone please tell me where the 5 wires of the 6-wire cable should be connect at each end I would really appreciate the information. For example where does the Blue wire go?
    Click image for larger version. 

Name:	Thermostat Connectors.jpg 
Views:	0 
Size:	81.3 KB 
ID:	1820

    I plan NOT to use the white wire of the 6-wire cable. Someone said I hook a wire to the brown wire in the HVAC unit, so I figured it would be better to use a brown wire. So I plan to use the following colors:

    Green
    Red
    Light Brown
    Yellow
    Blue
    Click image for larger version. 

Name:	New wire.jpg 
Views:	0 
Size:	56.4 KB 
ID:	1819
    I hope this makes sense.

    Ron

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •